LG FE Washer — Fix
On LG washers, the FE code means the washer has overfilled with water (overflow) — the water level is higher than it should be.
- Applies to
- LG appliances
- Time to fix
- 30 minutes – 1 hour
What it means
Causes include a stuck water inlet valve or a faulty water-level (pressure) sensor. This is a LG appliance fault code shown on the display. Codes can vary by model and appliance type, so always confirm against your specific model's manual or tech sheet. Unplug the appliance before any internal checks.
Symptoms
- FE on the display
- Washer keeps filling / overfills, then drains
How to fix it
- 1
Turn off water and unplug
1. Shut the taps and unplug to stop overfilling.
- 2
Check inlet valve / level sensor
1. A stuck inlet valve or faulty pressure sensor is the usual cause and needs replacing.
Frequently asked questions
Is an LG FE error serious?
It means overflow, so shut the water off. A stuck inlet valve or bad water-level sensor is usually to blame and should be repaired promptly.
Last updated July 20, 2026
Guidance only — always consult a qualified professional or the official service manual before carrying out repairs.