LG OE Washer — Fix
On LG washers, the OE code means the washer is not draining the water within the expected time — a drainage problem.
- Applies to
- LG appliances
- Time to fix
- 30 minutes – 1 hour
What it means
Usual causes are a clogged drain pump filter, a kinked or blocked drain hose, or a failing drain pump. This is a LG appliance fault code shown on the display. Codes can vary by model and appliance type, so always confirm against your specific model's manual or tech sheet. Unplug the appliance before any internal checks.
Symptoms
- OE on the display with standing water
- Cycle pauses full of water
How to fix it
- 1
Clean the drain filter and hose
1. Unplug the washer. 2. Open the lower access panel and clean the drain pump filter of debris/lint. 3. Check the drain hose for kinks or blockages.
- 2
Test the drain pump
1. If it still won't drain, the drain pump may have failed and need replacing.
Frequently asked questions
How do I fix an LG OE error?
Clean the drain pump filter and check the drain hose for kinks/clogs — that clears most OE errors. If it persists, the drain pump likely needs replacing.
Last updated July 20, 2026
Guidance only — always consult a qualified professional or the official service manual before carrying out repairs.