Samsung Appliance LC Washer — Fix
On Samsung Appliance washers, the LC code means a leak has been detected (also shown as LC1/E9) — the machine sensed water where it shouldn't be.
- Applies to
- Samsung Appliance appliances
- Time to fix
- 30 minutes – 1 hour
What it means
Causes include a leaking hose or connection, a failed seal, or a faulty leak sensor. This is a Samsung Appliance appliance fault code shown on the display. Codes can vary by model and appliance type, so always confirm against your specific model's manual or tech sheet. Unplug the appliance before any internal checks.
Symptoms
- LC / LC1 on the display
- Water under or around the machine
How to fix it
- 1
Find and stop the leak
1. Unplug, and check hoses, connections, and the door seal for leaks. 2. Tighten or replace the leaking part.
- 2
Check the leak sensor
1. If no leak is found, the leak sensor may be faulty.
Frequently asked questions
What does Samsung LC mean?
A leak was detected. Check hoses, connections, and the door seal; if there's no actual leak, the leak sensor may be faulty.
Last updated July 20, 2026
Guidance only — always consult a qualified professional or the official service manual before carrying out repairs.