Whirlpool F02 Washer — Fix
On Whirlpool washers, the F02 code means a long-drain condition — the washer is draining too slowly (on many models a drain restriction).
- Applies to
- Whirlpool appliances
- Time to fix
- 30 minutes – 1 hour
What it means
Causes include a clogged drain pump filter, a kinked/blocked drain hose, or excessive suds. This is a Whirlpool appliance fault code shown on the display. Codes can vary by model and appliance type, so always confirm against your specific model's manual or tech sheet. Unplug the appliance before any internal checks.
Symptoms
- F02 on the display
- Slow or incomplete drain
How to fix it
- 1
Clean the filter and hose
1. Unplug and clean the drain pump filter. 2. Check the drain hose for kinks/clogs.
- 2
Reduce suds
1. Use less HE detergent to prevent suds slowing the drain.
Frequently asked questions
What is Whirlpool F02?
A long-drain / slow-drain condition. Clean the drain filter and check the hose; excess suds can also cause it.
Last updated July 20, 2026
Guidance only — always consult a qualified professional or the official service manual before carrying out repairs.