Whirlpool F07 Washer — Fix
On Whirlpool washers, the F07 code means a motor control unit (MCU) error — the electronics that drive the motor detected a fault.
- Applies to
- Whirlpool appliances
- Time to fix
- 30 minutes – 1 hour
What it means
Causes include a failing motor control unit, a shorted motor, or wiring faults. This is a Whirlpool appliance fault code shown on the display. Codes can vary by model and appliance type, so always confirm against your specific model's manual or tech sheet. Unplug the appliance before any internal checks.
Symptoms
- F07 on the display
- Drum won't drive properly
How to fix it
- 1
Inspect motor and MCU
1. Check the motor and its control unit wiring for faults.
- 2
Replace the MCU
1. Replace a failed motor control unit if confirmed.
Frequently asked questions
Is F07 the motor or the board?
It's the motor control unit (MCU). Check the motor/wiring first; if those are fine, the MCU needs replacing.
Last updated July 20, 2026
Guidance only — always consult a qualified professional or the official service manual before carrying out repairs.